When you get in your 97 Jeep Wrangler, the first thing you notice is the comfortable temperature inside. You can thank the climate control for that! The climate control system in your jeep helps to keep the interior temperature at a comfortable level, no matter what the outside temperature is like.
Whether it’s hot or cold, you can count on your climate control system to keep things just right inside your jeep.
If you’re like most Jeep Wrangler owners, you probably don’t give your climate control system much thought – until it stops working. Then, it’s all you can think about! There are a few common issues that can cause your Wrangler’s climate control system to stop working properly.
One is a blown fuse. Check the fuse box under the hood and see if the fuse for the climate control system has blown. If so, replace it with a new one and see if that solves the problem.
Another common issue is a faulty blower motor resistor. This part controls the speed of the blower motor, so if it’s not working properly, your climate control system may not work at all, or may only work on certain settings. You’ll need to replace the blower motor resistor to fix this problem.
Finally, if your Wrangler’s air conditioning isn’t blowing cold air, there could be an issue with the A/C compressor clutch. This part engages and disengages the A/C compressor, so if it’s not working properly, your A/C won’t work either. You’ll need to have this part replaced in order to get your air conditioning working again.
97-98 Jeep Wrangler Heater Ac Temperature Climate Control
If you own a 97-98 Jeep Wrangler, chances are you’ve had some issues with your heater/AC temperature control. The good news is that there are some easy fixes that can help get your climate control back on track. One common issue is that the temperature control knob can become loose over time.
This can cause the temperature to fluctuate or become stuck in one position. To fix this, simply remove the knob and tighten the set screw underneath. Another issue that can occur is that the mode door actuator can fail, causing the air to only blow out of the vents or defrost vents.
This can be fixed by replacing the actuator with a new one. Finally, if your Jeep’s heater isn’t blowing hot air, it could be due to a clogged heater core. This is a more difficult fix, but it can be done by flushing the core with a cleaning solution and then running water through it until it runs clear.
If you’re not comfortable doing this yourself, take it to a mechanic and they’ll be able to do it for you.
How Do I Reset My Climate Control Module?
If you’re looking to reset your climate control module, there are a few things you’ll need to do. First, locate the module. It’s usually located in the dash or near the center console.
Once you’ve found it, disconnect the battery and then remove the module. With the module removed, you’ll then need to find the fuse box and remove the fuse for the climate control system. Once that’s been done, reconnect the battery and start your vehicle.
The final step is to press and hold the “recirculate” button for about five seconds. This will reset your climate control module and have it working like new again!
Does a 1997 Jeep Wrangler Have Air Conditioning?
It’s a common misconception that the 1997 Jeep Wrangler doesn’t have air conditioning. However, this is not the case! The Wrangler came standard with air conditioning in all models starting in 1997.
So if you’re looking to stay cool in your Jeep, you’re in luck!
What Does the Climate Control Module Do?
The climate control module is responsible for regulating the temperature and humidity in your car. It does this by controlling the flow of air through the vents and adjusting the level of heat or cool air that is produced. The module also controls the fan speed to ensure that the desired temperature is reached quickly and efficiently.
In some cars, the climate control module also regulates the amount of fresh air that enters the cabin.
Why is Heat Not Working in Jeep Wrangler?
There are many potential reasons why your Jeep Wrangler’s heat may not be working. It could be an issue with the heater core, the thermostat, the water pump, or even a clogged radiator. If you’re not sure where to start troubleshooting, here are a few tips that may help.
First, check to see if there is any coolant in the radiator. If there isn’t, then you’ll need to add some before proceeding. Next, bleed the air out of the cooling system by opening the bleeder valve on the thermostat housing.
Once that’s done, check all of the hoses leading to and from the engine for leaks or blockages. If everything looks good so far, it’s time to check the water pump. Make sure that it is receiving power and spinning freely.
If it isn’t, then replace it with a new one. Finally, if all else fails, you may have to replace your Jeep Wrangler’s heater core. This is a more involved repair and will require disassembling part of your dash paneling to access it.
Changing the Climate control cable on a 97 Jeep Wrangler TJ. Part-1.
Conclusion
If you’re a fan of the Jeep Wrangler, then you know that one of its best features is the climate control. The 97 Jeep Wrangler Climate Control is a great way to keep your Jeep at a comfortable temperature, no matter what the weather is like outside. This system uses sensors to automatically adjust the temperature inside your Jeep, so you don’t have to worry about manually adjusting it yourself.