The 1987 Jeep Wrangler is equipped with a fuel pump that is located in the gas tank. The fuel pump is responsible for delivering fuel to the engine. If the fuel pump fails, the engine will not receive any fuel and will not be able to run.
When replacing the fuel pump, it is important to use a new one that is compatible with the Jeep Wrangler.
If you own a 1987 Jeep Wrangler, you may have experienced problems with your fuel pump. Fuel pumps are responsible for supplying fuel to the engine, and if they fail, your Jeep won’t run. There are several symptoms of a failing fuel pump, including loss of power while driving, stalling, and difficulty starting the engine.
If you’re experiencing any of these issues, it’s time to replace your fuel pump.
Jeep YJ Fuel Pump Replacement (Carbureted)
Jeep Yj Fuel Pump Replacement
If your Jeep Yj is anything like mine, then you’re probably due for a fuel pump replacement. Here’s a quick guide on how to do it yourself! First, locate the fuel pump.
It’s located under the driver’s side rear seat. You’ll need to remove the seat and carpet to access it. Once you have access to the fuel pump, disconnect the negative battery cable to prevent any accidental sparks.
Then, disconnect the wiring harness from the pump and unscrew the retaining ring that holds the pump in place. Pull out the old pump and install the new one by reversing these steps. Make sure to reconnect everything before starting your Jeep back up!
How Long Does It Take to Replace a Fuel Pump in a Jeep?
It typically takes around two hours to replace a fuel pump in a Jeep. This job is usually best done by a mechanic, as it involves working with the vehicle’s gas tank. To replace the fuel pump, the mechanic will first disconnect the battery and then remove the gas tank from the Jeep.
Once the tank is removed, they will access the fuel pump and replace it with a new one.
How Much is a Fuel Pump for a Jeep Wrangler?
If you’re the owner of a Jeep Wrangler, then you know that one of the most important parts of your vehicle is the fuel pump. This small device is responsible for pumping gasoline from your tank to your engine, and it’s what allows your car to run. Unfortunately, fuel pumps don’t last forever.
Eventually, they will need to be replaced. When this time comes, you may be wondering how much a new fuel pump will cost. The answer isn’t always simple, as there are a few factors that can affect the price.
For example, the type of Jeep Wrangler you have will play a role in determining the cost of the replacement fuel pump. Generally speaking, however, you can expect to pay anywhere from $200 to $400 for a new fuel pump. This may seem like a lot of money, but it’s actually not too bad considering how important this part is to your vehicle’s performance.
How Much Does It Cost to Replace a Fuel Pump on a Jeep?
The average cost for a Jeep fuel pump replacement is between $719 and $818. Labor costs are estimated between $158 and $200 while parts are priced at $561 . Prices vary depending on the model of Jeep.
Where is the Fuel Filter Located on a Jeep Wrangler?
If you own a Jeep Wrangler, then you know that it’s important to keep up with the maintenance of your vehicle. Part of that maintenance is making sure that your fuel filter is clean and in good working order. So, where is the fuel filter located on a Jeep Wrangler?
The fuel filter on a Jeep Wrangler is located under the hood, on the drivers side. It’s mounted to the firewall near the brake master cylinder. To access it, you’ll need to remove the air intake duct work and unscrew the retaining clips that hold the fuel lines in place.
Then, you can simply pull out the old fuel filter and replace it with a new one.
In 1987, the Jeep Wrangler came with a fuel pump that was located in the engine bay. This pump is responsible for delivering fuel to the engine and is an important part of the Jeep’s operation. Over time, however, the fuel pump can become worn out and need to be replaced.
Replacing the fuel pump is not a difficult task and can be done by anyone with basic mechanical skills.