If you own a 2016 Jeep Wrangler, be aware that there is a recall for the oil filter housing. The recall affects vehicles with 3.6L engines that were built between June 10, 2015 and August 12, 2016. The problem is that the oil filter housing may crack and leak oil.
This can lead to engine damage or a fire. If you have one of these vehicles, take it to a dealer to have the oil filter housing replaced.
If you own a 2016 Jeep Wrangler, be aware that there is an oil filter housing recall. The recall affects Wranglers equipped with the 3.6L V6 engine. The problem is that the oil filter housing can crack and leak oil.
If this happens, it could lead to engine damage. Jeep will notify owners of affected vehicles and dealers will replace the oil filter housing free of charge. If you think your Wrangler might be affected by this recall, contact your local dealer for more information.
Jeep Wrangler Oil Filter Housing Replacement Cost
The average cost for a Jeep Wrangler oil filter housing replacement is between $370 and $420. Labor costs are estimated between $205 and $261 while parts are priced at $165. This range does not include taxes and fees, and does represent both 4-cylinder and 6-cylinder models.
When your Jeep Wrangler is due for an oil change, the oil filter housing should be replaced as well. The oil filter housing helps to keep contaminants out of the engine oil, which can cause serious damage if left unchecked. Replacing the entire housing is generally recommended instead of just the filter, as it’s more effective and less likely to cause problems down the line.
At JJ’s Auto Service, we can take care of your Jeep Wrangler’s oil filter housing replacement quickly and efficiently. We only use genuine Mopar parts for all our repairs, so you can rest assured knowing that your vehicle is in good hands. Schedule an appointment with us today!
What is the 2016 Jeep Wrangler Oil Filter Housing Recall
In 2016, Jeep Wrangler owners were notified of a recall for the oil filter housing. The recall was issued because it was discovered that the housing could crack and leak oil, potentially causing engine fires. The recall affected approximately 1.4 million vehicles equipped with 3.6L engines.
Jeep dealerships will replace the oil filter housing free of charge.
Why was the Recall Issued
In February of 2010, Johnson & Johnson issued a recall for over 40 different types of children’s Tylenol, Motrin, Zyrtec, and Benadryl due to manufacturing problems that could potentially lead to serious health complications. According to the U.S. Food and Drug Administration (FDA), the affected products were “unappealing” and had “pre-existing quality issues” that had not been properly addressed by Johnson & Johnson. The specific manufacturing problems included inconsistent concentrations of active ingredients, incorrect labels, and improper packaging.
These issues could have resulted in children receiving either too much or too little medication, which could have led to serious health consequences such as overdose or underdose. In addition, the FDA also found evidence that Johnson & Johnson knew about these manufacturing problems but failed to take appropriate action to fix them. The recall was a precautionary measure taken by Johnson & Johnson in order to protect consumers from potentially harmful products.
Although no injuries or illnesses were reported at the time of the recall, the company wanted to err on the side of caution given the potential risks involved. If you have any of the affected products in your home, it is important that you stop using them immediately and contact Johnson & Johnson for further instructions.
What are the Consequences of Not Getting the Recall Fixed
If you don’t get the recall fixed, you could be putting yourself and others at risk. The consequences of not getting a recall fixed can vary depending on the severity of the issue. In some cases, it may only result in a loss of power or decreased performance.
However, in other cases, it could lead to an engine fire or complete engine failure. If you’re driving a car with an unfixed recall, it’s important to be aware of the risks involved. Make sure to check for updates on the recall and stay up-to-date on any new information.
If possible, avoid driving your car until the recall is fixed. And if you do have to drive it, be extra careful and take precautions like keeping a fire extinguisher in your car just in case.
How Do I Get My Jeep Wrangler Oil Filter Housing Replaced
If your Jeep Wrangler is in need of an oil filter housing replacement, there are a few things you’ll need to do. First, you’ll need to find the right replacement part for your Wrangler. You can do this by finding the model and year of your Jeep, and then searching for “oil filter housing replacement” + that information.
Once you’ve found the right part, it’s time to get started with the replacement process. The first step is to remove the old oil filter housing from your Jeep. This can be done by loosening the bolts that hold it in place and then carefully removing it from the engine bay.
With the old housing out of the way, it’s time to install the new one. Simply line up the new housing with the bolt holes and then tighten down all of the bolts until they’re snug. Once everything is tightened down, you can now add fresh oil to your Jeep and start it up.
Be sure to check for any leaks before heading out on your next adventure!
3.6 Pentastar Jeep Wrangler Unlimited Rubicon JKUR Oil Cooler Replacement How To Oil Leak Fix
Conclusion
In 2016, Jeep Wrangler owners were notified of a recall for the oil filter housing. The recall was issued because the housing could crack and leak oil, which could lead to engine fires. Owners were advised to take their vehicles to a Jeep dealership to have the housing replaced.
{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”:[{“@type”: “Question”, “name”: “What is the 2016 Jeep Wrangler Oil Filter Housing Recall “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” In 2016, Jeep Wrangler owners were notified of a recall for the oil filter housing. The recall was issued because it was discovered that the housing could crack and leak oil, potentially causing engine fires. The recall affected approximately 1.4 million vehicles equipped with 3.6L engines. Jeep dealerships will replace the oil filter housing free of charge.” } } ,{“@type”: “Question”, “name”: “Why was the Recall Issued “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” In February of 2010, Johnson & Johnson issued a recall for over 40 different types of children’s Tylenol, Motrin, Zyrtec, and Benadryl due to manufacturing problems that could potentially lead to serious health complications. According to the U.S. Food and Drug Administration (FDA), the affected products were “unappealing” and had “pre-existing quality issues” that had not been properly addressed by Johnson & Johnson. The specific manufacturing problems included inconsistent concentrations of active ingredients, incorrect labels, and improper packaging. These issues could have resulted in children receiving either too much or too little medication, which could have led to serious health consequences such as overdose or underdose. In addition, the FDA also found evidence that Johnson & Johnson knew about these manufacturing problems but failed to take appropriate action to fix them. The recall was a precautionary measure taken by Johnson & Johnson in order to protect consumers from potentially harmful products. Although no injuries or illnesses were reported at the time of the recall, the company wanted to err on the side of caution given the potential risks involved. If you have any of the affected products in your home, it is important that you stop using them immediately and contact Johnson & Johnson for further instructions.” } } ,{“@type”: “Question”, “name”: “What are the Consequences of Not Getting the Recall Fixed “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” If you don’t get the recall fixed, you could be putting yourself and others at risk. The consequences of not getting a recall fixed can vary depending on the severity of the issue. In some cases, it may only result in a loss of power or decreased performance. However, in other cases, it could lead to an engine fire or complete engine failure. If you’re driving a car with an unfixed recall, it’s important to be aware of the risks involved. Make sure to check for updates on the recall and stay up-to-date on any new information. If possible, avoid driving your car until the recall is fixed. And if you do have to drive it, be extra careful and take precautions like keeping a fire extinguisher in your car just in case.” } } ,{“@type”: “Question”, “name”: “How Do I Get My Jeep Wrangler Oil Filter Housing Replaced “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” If your Jeep Wrangler is in need of an oil filter housing replacement, there are a few things you’ll need to do. First, you’ll need to find the right replacement part for your Wrangler. You can do this by finding the model and year of your Jeep, and then searching for oil filter housing replacement + that information. Once you’ve found the right part, it’s time to get started with the replacement process. The first step is to remove the old oil filter housing from your Jeep. This can be done by loosening the bolts that hold it in place and then carefully removing it from the engine bay. With the old housing out of the way, it’s time to install the new one. Simply line up the new housing with the bolt holes and then tighten down all of the bolts until they’re snug. Once everything is tightened down, you can now add fresh oil to your Jeep and start it up. Be sure to check for any leaks before heading out on your next adventure!” } } ] }