Due to a problem with the oil filter housing, Jeep is recalling an estimated 151,857 Wrangler SUVs in the U.S. The recall covers Wranglers from the 2018 model year equipped with 3.6-liter V6 engines. According to Jeep, the oil filter housing may crack and leak oil, potentially leading to engine damage or stalling.
If you own a Jeep Wrangler, then you might want to keep an eye out for a recall that has been issued for the oil filter housing. According to reports, there is a potential for the housing to crack and leak oil, which could lead to engine damage. If you think your Wrangler might be affected, then you should contact your local dealer to get it checked out.
In the meantime, be sure to check your oil level regularly and top it off if necessary.
Jeep Wrangler Oil Filter Housing Replacement Cost
The average cost for a Jeep Wrangler oil filter housing replacement is between $298 and $313. Labor costs are estimated between $123 and $156 while parts are priced at $175. This range does not include taxes and fees, and does not factor in your specific vehicle’s location.
The oil filter housing keeps all the engine’s lubricating oil under control. It also contains the oil pressure sensor, which helps to regulate the amount of oil flowing through the engine. If your Jeep Wrangler starts to have issues with its oil pressure, it may be time to replace the entire housing.
How Much Does It Cost to Replace Oil Filter Housing?
If you’re the do-it-yourself type, then you know that one of the most important maintenance tasks for your car is to regularly change the oil and filter. But what happens when the oil filter housing starts to leak? In this blog post, we’ll discuss how much it costs to replace an oil filter housing gasket.
The first thing you need to do is purchase a new oil filter housing gasket. These are relatively inexpensive and can be found at most auto parts stores. Once you have the gasket, installation is pretty straightforward.
First, remove the old gasket from the housing. You may need to use a screwdriver or other tool to pry it off. Next, clean the surface of the housing where the gasket will sit with some brake cleaner or other solvent.
This will ensure that there’s no dirt or debris that could cause leaks later on. Now, apply a thin layer of sealant to both sides of the new gasket and install it on the housing. Make sure that it’s seated properly and then reinstall the housing onto your car.
That’s it! You’ve now successfully replaced your oil filter housing gasket and hopefully stopped any leaks in their tracks!
What Causes the Oil Filter Housing to Fail?
The oil filter housing is responsible for filtering out impurities from the engine oil as it circulates. Over time, this housing can become clogged with dirt and debris, causing it to fail. In some cases, the housing may also crack or leak, which can lead to engine damage.
Is There a Recall on My Jeep Wrangler?
If you are a Jeep Wrangler owner, you may have heard that there is a recall on the vehicle. This is due to an issue with the airbags. The recall affects vehicles from model years 2007-2010.
If you own one of these vehicles, it is important to get it fixed as soon as possible. The recall is for a fault in the airbag system. The airbags may not deploy properly in a crash, which could lead to serious injuries or even death.
Jeep dealerships will be able to fix the problem for free. If you have already had your Jeep Wrangler repaired for this issue, you may be eligible for reimbursement from Chrysler. If you own a Jeep Wrangler, it is important to get it checked and repaired if necessary as soon as possible.
This recall could save your life in the event of a crash.
What Does the Oil Filter Housing Do?
The oil filter housing is a canister that contains the oil filter and provides a place for the dirty engine oil to drain back into the engine after it has been filtered. The housing also has a baffle or screen to keep the oil from splashing around too much as it flows back into the engine.
Replacing the oil cooler housing Jeep JK
Jeep is recalling more than 200,000 Wrangler SUVs due to an issue with the oil filter housing. The recall affects Wranglers from the 2018 and 2019 model years. Jeep says that a wiring harness can come into contact with the oil filter housing, causing a short circuit.
This could lead to engine stalling or a fire. Jeep is aware of one incident of engine stalling, but no injuries or accidents have been reported. Owners will be notified of the recall starting in March, and dealers will replace the wiring harness free of charge.