Looking to add a little more power to your Jeep Wrangler JK? A LS swap might be just what you need. Check out our LS swap kit to get everything you need to make the swap happen.
If you’re looking to swap the engine in your Jeep Wrangler JK, there are now kits available that make the process much easier. These LS swap kits come with everything you need to make the swap, including engine and transmission mounts, driveshaft, fuel system, and more. The benefits of swapping to an LS engine are many.
LS engines are known for their reliability and performance, so you can expect your Jeep to run better than ever after the swap. And because LS engines are so popular, there’s a huge aftermarket support network for them, so finding parts and accessories is easy. If you’re thinking about doing an LS swap in your Jeep Wrangler JK, be sure to check out one of these kits.
They’ll make the process much easier and ensure that your Jeep runs great when it’s all done.
Jeep Jk Ls Swap Parts List
If you own a Jeep JK and are considering an LS swap, there are a few things you need to know. First, what is an LS engine? LS stands for “light sweet” and is GM’s new generation of V8 engines.
They were first introduced in the 1997 Corvette, and since then have become one of the most popular engines to swap into older vehicles. There are many reasons why people choose to do an LS swap – better performance, more reliability, and increased fuel economy are just a few. Now that you know what an LS engine is, let’s talk about what parts you need for your Jeep JK LS swap.
The most important part of any engine swap is the engine itself. You can either buy a used LS engine from a salvage yard or online retailer, or go with a brand new crate engine. If you go with a used engine, make sure it comes with all the accessories needed for installation (intake manifold, fuel injectors, water pump, etc.).
Once you have your engine sorted out, you’ll need to source the rest of the parts needed for the swap. A good place to start is with Summit Racing or JEGS – they both carry a wide selection of parts specifically forLS swaps. You’ll need items like motor mounts, headers, exhaust systems, driveshafts , cooling system components , wiring harnesses , and more .
While it might seem like a lot at first glance , don’t worry – there are kits available that will make sourcing all these parts much easier . So there you have it – everything you need to know about doing anLS swap in your Jeep JK . With careful planning and execution , this project can be completed relatively easily and will result ina big performance upgrade for your rig .
How Much Does It Cost to Ls Swap a Jeep?
Assuming you have a Jeep that you want to LS swap and a budget of $8,000, here’s what you can expect to spend: -A used LS engine will cost between $3,000 and $4,000. You could also buy a new LS engine for around $7,000.
-An LS engine controller will cost about $600. -You’ll need an LS oil pan, which will cost about $200. -A set of LS headers will cost between $500 and $1,000.
-An exhaust system will cost between $500 and $2,000. -You’ll need a new radiator and cooling fans, which will cost between $500 and $1,000. -A fuel system will cost between $700 and $1,400.
This includes the fuel pump, lines, and regulator. -The transmission will cost between $800 and$2,400. This includes the torque converter if you’re using an automatic transmission.
-The driveshaft will need to be custom made and will cost between$600and$1 200 . -‘rear end’axle assembly from Chevy or Ford with disc brakes is recommended – this generally costs less than swapping to discs on your original axle)willcostbetween$700and$1200 .
Can You Put an Ls Engine in a Jeep Wrangler?
It is possible to put an LS engine in a Jeep Wrangler. This can be done by swapping out the original engine for an LS engine. The LS engine is a popular choice for those looking to improve their Wrangler’s performance.
There are many benefits to swap out your old engine for an LS engine, such as increased power and torque, better fuel economy, and more reliability. While it is possible to do this swap yourself, it is highly recommended that you seek professional help in order to ensure that the job is done correctly.
Can You Put a V8 in a Jeep Wrangler?
There are a few different ways to go about this, but generally speaking, yes, you can put a V8 engine in a Jeep Wrangler. The most popular route is to swap out the stock engine for a smaller V8, such as a Chevy 350 or Ford 302. This will require some modifications to the engine bay and drivetrain, but nothing too major.
You can also install a bigger V8, such as a Dodge Hemi or Chevy LS3, but this will require more extensive modifications. Either way, it’s definitely possible to stuff a V8 into your Jeep Wrangler.
What Engines Fit in a Jeep Wrangler Jk?
Assuming you are referring to the Jeep Wrangler JK that was produced from 2007-2018: The engine choices for the Jeep Wrangler JK were as follows: 2007-2011: 3.8L V6
2012-2018: 3.6L V6 2007-2018 (Export only): 2.8L CRD I4 turbodiesel There were also a few special editions of the Jeep Wrangler JK that had different engines, such as the Rubicon 10th Anniversary Edition which had a 5.7L Hemi V8.
Jeep Wrangler jk ls swap
Conclusion
Looking to swap out the engine in your Jeep Wrangler JK? Check out this LS Swap Kit! This kit includes everything you need to make the swap, including an LS engine, transmission, mounts, headers, and more.
With this kit, you can have your Jeep up and running with a new engine in no time.