Jeep Wrangler Hitch Ball Mount

A Jeep Wrangler hitch ball mount is a device that is used to attach a trailer to a Jeep Wrangler. There are many different types of hitch ball mounts, but they all serve the same purpose. The most common type of hitch ball mount is the receiver hitch, which is what we will be discussing in this article.

Receiver hitches come in many different sizes and styles, so it is important to choose the right one for your Jeep Wrangler.

If you own a Jeep Wrangler, then you know that having a hitch ball mount is essential for towing. But what if you don’t have one? Here’s a quick and easy guide on how to install a hitch ball mount on your Jeep Wrangler.

First, you’ll need to purchase a hitch ball mount that is compatible with your Jeep. There are many different sizes and styles available, so be sure to choose the one that best suits your needs. Next, locate the two holes in the frame of your Jeep where the hitch ball mount will attach.

Use a tape measure to determine the distance between these two holes so that you can properly position the hitch ball mount during installation. Now it’s time to put the hitch ball mount in place. Line up the holes on the hitch ball mount with the holes in the frame of your Jeep and start threading in the bolts.

Once all four bolts are tight, your hitch ball mount is installed and ready to use!

Do Jeep Wranglers Come With a Hitch

Yes, Jeep Wranglers come with a hitch. The hitch is located under the rear bumper and is used to tow trailers or other vehicles. There are two types of hitches available for the Wrangler: the standard receiver hitch and the heavy-duty receiver hitch.

What Size Hitch Ball Mount Do I Need?

If you’re planning on towing a trailer with your vehicle, then you’ll need to equip it with a hitch ball mount. But what size hitch ball mount do you need? The size of the hitch ball mount will be determined by the size of the trailer’s coupler.

The most common sizes are 1-7/8″, 2″ and 2-5/16″. To figure out what size hitch ball mount you need, first measure the inside diameter of the trailer’s coupler. This is typically stamped on the side of the coupler.

Once you know the inside diameter, simply match it up with the corresponding hitch ball mount size. For example, if your trailer has a 2″ coupler, then you’ll need a 2″ hitch ball mount. It’s that simple!

Can You Put a Hitch on a Jeep Wrangler?

Yes, you can put a hitch on a Jeep Wrangler. There are aftermarket hitches available that bolt onto the frame of the Jeep. These hitches are typically rated for hauling light to moderate loads.

If you plan on regularly hauling heavier loads, then you may want to consider having a custom hitch installed by a professional.

How High Should My Hitch Ball Be off the Ground?

This is a great question and one that we get asked a lot. The answer however, may not be as cut and dry as you think. In order to ensure your trailer is level when hitched up, you need to take into account the height of your tow vehicle, the height of your trailer tongue and the amount of drop or rise needed for your particular hitch ball mount.

The general rule of thumb is that the center of your hitch ball should be about level with the top of your trailer coupler. However, this is just a starting point. You will also need to take into account any additional drop or rise needed for your particular hitch ball mount.

For example, if you have a 2″ drop hitch ball mount, you will need to lower your hitch ball by 2″. Once you have determined how much drop or rise you need for your particular setup, it’s time to start adjusting the height of your hitch ball. If you find that your trailer is still not level after adjusting the height of your hitch ball, there are a few other things that you can try:

* Move the location of your weight distribution bars forward or backward on their brackets until the trailer becomes level. * Adjust the tension on your weight distribution bars until the trailer becomes level. * Add air to or release air from your trailer’s tires until the trailer becomes level.

If after trying all of these things you are still having trouble getting your trailer to sit level when hitched up, please feel free to give us a call or stop by our store and we would be more than happy to help you out!

Can You Put a Class 3 Hitch on a Jeep Wrangler?

Yes, you can put a class 3 hitch on a Jeep Wrangler. Class 3 hitches are typically used for towing trailers or RVs and can handle up to 8,000 pounds. The Jeep Wrangler is rated to tow up to 3,500 pounds, so a class 3 hitch would give you plenty of capacity for towing.

There are a few things to keep in mind when putting a hitch on your Jeep Wrangler. First, make sure that your vehicle is properly equipped with the proper wiring harness and brake controller. Second, be aware of the tongue weight of your trailer or RV.

Tongue weight is the downward force exerted by the trailer on the hitch receiver and should be between 10-15% of the total trailer weight. Too much tongue weight can cause problems with steering and braking. Finally, make sure that you use the correct size ball mount and trailer coupler for your application.

2018-2020 Jeep Wrangler JL: Mopar Hitch Receiver Assembly Kit Install


If you own a Jeep Wrangler, then you know that one of the best features about this vehicle is its versatility. You can take it off-road, on the beach, or even use it to tow your boat. But in order to do any of these things, you need a hitch ball mount.

There are a lot of different hitch ball mounts on the market, but not all of them are created equal. You want to make sure that you get a hitch ball mount that is specifically designed for the Jeep Wrangler. This will ensure that it fits properly and won’t cause any damage to your vehicle.

When choosing a hitch ball mount, you also want to consider what size you need. The size of the mount will determine how much weight it can support.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top