In this guide, we will compare three popular oil filters for the 3.
Best Oil Filter For 3.6 Pentastar
SERIAL
PRODUCT IMAGE
PRODUCT NAME
ACTION
SERIAL
1
ACTION
SERIAL
2
ACTION
SERIAL
3
ACTION
SERIAL
4
ACTION
SERIAL
5
ACTION
SERIAL
6
ACTION
SERIAL
7
ACTION
SERIAL
8
ACTION
Best Oil Filter For 3.6 Pentastar
2011-2013 Chrysler Jeep Dodge Oil filter 3.6L Pentastar Engine MOPAR OEM
Highlighted Features:
1. Increased filter efficiency.
2. Prevents oil leaks.
3. Enhances engine performance.
4. Reduces wear and tear.
5. Lengthens engine life.
Article Chrysler Jeep Dodge Oil filter 3.6L Pentastar Engine MOPAR OEM
The Chrysler 3.6L Pentastar engine oil filter should be replaced every 5,000 miles under normal driving conditions. However, if the vehicle is frequently driven in dusty or off-road conditions, the filter should be replaced more often. The filter is located on the top of the engine, and is easy to access and replace.
This oil filter is a direct replacement for the factory-installed filter on the 3.6L Pentastar engines used in several Chrysler, Jeep, and Dodge vehicles. It’s made of high-quality materials and fits perfectly, making it an excellent choice for those looking for an OEM-quality filter.
iFJF PS-7026 Oil Filter Replacement for Pentastar 3.6L V6 Dodge Charger 2014-2019 Ram ProMaster 1500 2500 3500 2014-2020 Full Synthetic Conventional and Blended Motor Oil Replaces 68191349AA
Highlighted Features:
1) IFJF PS-7026 is a high quality oil filter replacement for the Pentastar 3.6L V6 Dodge Charger 2014-2019 Ram ProMaster 1500 2500 3500.
2) It is made of full synthetic media which filters out more dirt and contaminants than conventional or blended motor oils.
3) The IFJF PS-7026 is designed to fit these models and can be installed quickly and easily.
4) It helps to protect vital engine components and extend the life of your vehicle.
5) The IFJF PS-7026 is a great value and can be purchased at a reasonable price.
Dodge Charger 2014-2019 Ram ProMaster 1500 2500 3500 2014-2020
Oil filter replacement for Pentastar 3.6L V6 engines.
Use only Chrysler Group LLC approved replacement oil filters. Do not use a foreign or aftermarket oil filter.
Oil filter part number: PS-7026
Oil Filter wrench size: 17mm
Suppliers part number: 68191349AA
This article is for informational purposes only. Chrysler Group LLC is not responsible for any damage that may occur as a result of using information contained in this article.
The Pentastar 3.6L V6 engine found in the Dodge Charger, Ram ProMaster 1500, 2500, and 3500 uses an oil filter with the part number PS-7026. The suppliers part number is 68191349AA. This oil filter is a full synthetic conventional and blended motor oil filter. It replaces the following filters: 68191349AA, 68009227, 68009228, 68051644AA, and 68051645AB.
The PS-7026 from Pentastar is a high-quality oil filter that is designed to be a direct replacement for the stock unit in your Dodge Charger or Ram ProMaster. It is made with full synthetic or conventional oil in mind, and features a high-quality construction that will help keep your engine running smoothly for years to come.
Chrysler Jeep Dodge RAM 3.2L 3.6L V6 Pentastar Oil Filter Set of 3 Mopar
Highlighted Features:
1. Fits a variety of Chrysler, Jeep, and Dodge vehicles.
2. Removes contaminants from the oil to help keep the engine running smoothly.
3. Protects the engine against wear and corrosion.
4. Keeps the oil pressure consistent.
5. Can improve the engine’s performance and lifespan.
If you drive a Chrysler, Jeep, Dodge RAM with the 3.2L or 3.6L V6 Pentastar engine, you need to change your oil and oil filter every 7,500 miles or 7.5 months, which ever comes first. A new set of oil filters for a Chrysler, Jeep, Dodge RAM with the 3.6L V6 Pentastar engine is a great way to make sure your engine is getting the best possible protection.
The oil filters in this set are made by Mopar, and they are designed to fit the 3.2L and 3.6L V6 Pentastar engines in Chrysler, Jeep, and Dodge RAM vehicles. The filters in this set are made from high quality materials, and they are precision-engineered to fit the specific needs of the 3.2L and 3.6L V6 Pentastar engines.
If you’re looking for a great way to protect your engine, a new set of oil filters for the 3.2L or 3.6L V6 Pentastar engine is a great option. Order yours today!
Good quality oil filters. Fit my Jeep perfectly.
Chrysler Jeep Dodge RAM 3.2L 3.6L V6 Pentastar Oil Filter Set of 6 Mopar
Highlighted Features:
1. The Chrysler Jeep Dodge RAM 3.2L 3.6L V6 Pentastar Oil Filter Set of 6 Mopar are high-quality oil filters.
2. They are easy to install.
3. They protect the engine from harmful contaminants.
4. They improve the performance and fuel economy of the engine.
5. They are made by a reliable manufacturer.
The Pentastar engine is a six-cylinder engine that was first introduced by Chrysler Corporation in 2011. The engine was designed as a replacement for the 3.6L V6 engine. The Pentastar engine is available in multiple configurations, including a 3.2L and 3.6L version. The engine is also available in both gasoline and diesel versions.
The Pentastar engine has received acclaim for its high performance and fuel efficiency. The engine has also been praised for its low noise and vibration levels.
The Pentastar engine is available as a set of six oil filters. The filters are designed to protect the engine from excessive wear and tear. The filters are made from high quality materials that can withstand the rigors of daily use.
If you’re looking for a quality oil filter set for your Chrysler, Dodge, Jeep or RAM 3.2L or 3.6L V6 engine, look no further than Mopar. These filters are designed to meet or exceed original equipment specifications, and they’ll help keep your engine running smoothly.
GoMyself 68191349AA Oil Filter Replacement for Pentastar 3.6L V6 Dodge Charger 2014-2019 Ram ProMaster 1500 2500 3500 2014-2020 Full Synthetic Conventional Blended Motor Replaces HP7026 68191349AB
Highlighted Features:
1. The filter is very easy to install.
2. It is a quality product.
3. It does a great job at filtering out debris.
4. The price is very reasonable.
5. The customer service is excellent.
An oil filter is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or other types of hydraulic oil. Oil filters are passive devices and can only remove particles that are smaller than the pores in the filter element.
The Pentastar 3.6L V6 Dodge Charger and Ram ProMaster 1500 2500 3500 use a full synthetic conventional blended motor oil. The replacement oil filter for this engine is the HP7026. This oil filter is a passive device and can only remove particles that are smaller than the pores in the filter element.
If you’re looking for an oil filter replacement for the Pentastar 3.6L V6 Dodge Charger 2014-2019, Ram ProMaster 1500 2500 3500 2014-2020, then this is the one for you. It’s a full synthetic, conventional, blended motor oil filter that replaces the HP7026. It’s made to keep your engine running smoothly and cleanly, and it’ll help to prolong its life.
FLYPIG fit 2014 Dodge Ram Chrysler 3.6l Pentastar Engines Oil Filter
Highlighted Features:
1) The FLYPIG fit oil filter is designed to fit the 2014 Dodge Ram Chrysler 3.6l Pentastar engines.
2) The oil filter is made with quality materials that can withstand high temperatures and pressures.
3) The oil filter has a large filtration area that helps to remove contaminants from the engine oil.
4) The oil filter has a built-in bypass valve that helps to protect the engine against damage caused by a clogged filter.
5) The oil filter is easy to install and can be replaced quickly and easily.
The 3.6L Pentastar engine in the Dodge Ram and Chrysler vehicles is a V6 engine that uses a timed oil filter replacement system. This means that the oil filter should be replaced at a specific time or mileage, and not necessarily when the oil is changed. The recommended time or mileage for the oil filter replacement on the 3.6L Pentastar engine is every 7,500 miles or every 7.5 months, whichever comes first.
This oil filter is a good product and it fits the 2014 Dodge Ram Chrysler 3.6l Pentastar engines. I am very happy with it.
Buying Guide for best oil filter for 3.6 pentastar
Buying Guide for best oil filter for 3.6 pentastar:
If you are looking for the best oil filter for 3.6 pentastar, there are a few things you will need to consider. Of course, the most important factor will be the quality of the oil filter itself. However, you should also take into account the size and fit of the filter, as well as any special features that might be beneficial.
1. The quality of the oil filter is the most important factor to consider. Look for a filter that is made from high-quality materials and is designed to meet or exceed the OEM specifications.
2. The size and fit of the oil filter is also important. Make sure to select a filter that is the correct size for your engine and that will fit properly in the filter housing.
3. Some oil filters come with special features that can be beneficial. For example, some filters have built-in pressure gauges that allow you to monitor the oil pressure. Others have anti-drainback valves that keep the oil in the filter and circulating through the engine when the vehicle is not running.
4. The price of the oil filter is also something to consider.
Frequently Asked Question
How Much Oil Does A 3.6 Chrysler Engine Hold?
Chrysler engines typically hold about 4.5 quarts of oil.
Is The 3.6 Pentastar Engine Reliable?
There is no one-size-fits-all answer to this question, as the reliability of the 3.6 Pentastar engine will depend on a number of factors, including how it is used and maintained. That said, the Pentastar engine has a good reputation for reliability and is often praised for its performance and fuel economy.
What Weight Oil Does A 3.6 Pentastar Take?
The 3.6 Pentastar takes a 5w30 weight oil.
How Many Quarts Of Oil Does A 3.6 Vvt Engine Take?
3.6 VVT engines take about 6 quarts of oil.
How Many Quarts Does A 3.6 Take?
3.6 quarts
What Kind Of Oil Does A 3.6 Pentastar Take?
The 3.6 Pentastar V6 engine takes conventional, multi-grade motor oil that meets the Chrysler MS-6395 specification.
Conclusion
The best oil filter for the 3.6 Pentastar engine is the Mobil1 M1-110 oil filter.