2018 Jeep Wrangler Jl Tpms Sensor

The new 2018 Jeep Wrangler JL is equipped with a Tire Pressure Monitoring System (TPMS) sensor. This sensor monitors the air pressure in your tires and alerts you when it gets too low.

As the weather gets colder, it’s important to make sure your car is ready for the colder temperatures. One way to do this is to check your tire pressure. Your car’s Tire Pressure Monitoring System (TPMS) can help you with this.

The TPMS sensor monitors your tire pressure and sends a signal to your car’s computer when it drops below a certain level. This lets you know that you need to add air to your tires. If you have a 2018 Jeep Wrangler JL, then you’ll want to pay attention to the TPMS sensor.

This sensor is located in the front of the vehicle, on the driver’s side. You’ll need to remove the cap from the sensor in order to access it. Once you’ve done that, use a tire pressure gauge to check your tire pressure.

If it’s low, add air until it reaches the proper level. Keeping an eye on your tire pressure is just one way to make sure your car is ready for winter weather driving.

Jeep Jl Tpms Sensor

If you own a Jeep JL, you might be wondering what TPMS is and why you need it. TPMS stands for Tire Pressure Monitoring System, and it’s a feature that monitors the air pressure in your tires. If the pressure gets too low, the system will alert you so you can add air to them.

There are two different types of TPMS sensors – direct and indirect. Direct sensors are mounted inside the tire, while indirect sensors are mounted on the wheel. Both types of sensor work similarly, but direct sensors tend to be more accurate.

Jeep JLs come equipped with either type of sensor, depending on which model you have. If you’re not sure which type of sensor your Jeep has, you can check the owner’s manual or ask a dealer. TPMS is an important safety feature that can help prevent flats and other problems caused by low tire pressure.

If you have questions about how it works or how to use it, don’t hesitate to ask your dealer or consult your owner’s manual.

What Type of Tpms Does Jeep Use?

If you own a Jeep, odds are you’re aware of the importance of having a good Tire Pressure Monitoring System (TPMS). But what kind of TPMS does Jeep use? And is it the best option for your vehicle?

Jeep vehicles come equipped with one of two types of TPMS: direct or indirect. Direct TPMS uses sensors mounted inside each tire to monitor pressure levels. Indirect TPMS, on the other hand, uses the speed sensor data from the ABS system to estimate pressure levels.

So which type of TPMS is better? That’s hard to say, as both have their pros and cons. Direct TPMS is more accurate, but also more expensive.

Indirect TPMS is less expensive, but can be less accurate. Ultimately, it’s up to you to decide which type of system is best for your Jeep.

Do Jeep Tpms Sensors Need to Be Programmed?

TPMS, or Tire Pressure Monitoring System, sensors are devices that are mounted onto the wheels of a vehicle. They work by measuring the pressure in the tires and sending a signal to a receiver inside the vehicle. The receiver then displays the information on a dash-mounted display.

Most TPMS sensors come with a built-in battery that lasts for several years. However, some models may require occasional battery replacement. In addition, some TPMS systems may need to be recalibrated from time to time.

This is typically done when new tires are installed on the vehicle or if the tire pressure changes significantly. If you have questions about your specific TPMS system, consult your owner’s manual or contact your local Jeep dealer.

Do Aftermarket Tpms Need to Be Programmed?

As the name suggests, Aftermarket TPMS (Tire Pressure Monitoring System) need to be programmed in order to work with your specific vehicle. This is because each vehicle has its own unique Tire Pressure Sensor ID that needs to be matched with the correctTPMS sensor. When you get a new set of aftermarket TPMS sensors, the first thing you’ll need to do is program them to work with your car.

The process is relatively simple and can usually be done using a handheld TPMS tool or by visiting a professional tire shop or dealership. Once the new sensors are programmed, they should be able to provide accurate tire pressure readings for your vehicle. If you’re having trouble programming the sensors yourself, it’s best to consult with a professional who can help you out.

How Do You Reset the Tpms on a Jeep Jl?

If you have a Jeep JL with a Tire Pressure Monitoring System (TPMS), you may need to reset the system from time to time. Here’s how to do it: First, find the TPMS reset button.

This is usually located on the dash, near the steering wheel. Press and hold the TPMS reset button for about 5 seconds. The system should beep to indicate that it has been reset.

Now, start the engine and drive around for a bit. The TPMS light should go off after a few minutes of driving. If it doesn’t, you may need to take your Jeep to a dealer or mechanic for further diagnosis.

Tire Pressure Monitoring System-How to use the tpms sensor and tpms light in 2018 Jeep Wrangler


The new 2018 Jeep Wrangler JL has a Tire Pressure Monitoring System (TPMS) sensor that is designed to help you keep an eye on your tire pressure. This can be a valuable tool, especially if you are frequently driving in off-road conditions where tires can become damaged or punctured. The TPMS sensor will alert you if the pressure in one of your tires drops below a certain level, so you can take action to avoid a potentially dangerous situation.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top