If your 2017 Jeep Wrangler wipers aren’t working, it’s most likely due to a problem with the wiper motor. The wiper motor is what powers the wipers, and when it goes bad, the wipers will stop working. There are a few other things that can cause the wipers to stop working, but the vast majority of the time it’s going to be an issue with the wiper motor.
If you have a 2017 Jeep Wrangler, you may have noticed that your windshield wipers are not working as they should. This is a common problem with this model of Jeep and it can be quite frustrating. There are a few things that you can do to try and fix the problem yourself, but if all else fails, you may need to take it to a mechanic.
The first thing that you should check is the fluid level in your windshield wiper reservoir. If the fluid is low, simply add more until it reaches the fill line. Next, check the blades themselves to see if they are bent or damaged in any way.
If so, they will need to be replaced. If neither of these solutions fixes the problem, then there may be an issue with the wiper motor itself. This is a more serious problem and will likely require professional help to fix.
In the meantime, you can try using your wipers on the highest setting to see if that makes them work better.
Jeep Jk Wipers Not Working
If you’re a Jeep JK owner, then you know that one of the most annoying things is when your wipers don’t work. It’s even more frustrating when you can’t figure out why they’re not working. Here are some common reasons why your Jeep JK wipers might not be working:
The most common reason for wipers not working is a blown fuse. Check the fuse box under the hood and see if the fuse for the wipers is blown. If it is, replace it with a new one and see if that fixes the problem.
Another possibility is that the wiper motor itself is bad. This can be checked by disconnecting the wiper motor from the power source and testing it with a voltmeter. If there’s no power going to the motor, then it needs to be replaced.
If neither of those solutions fix the problem, then it’s possible that there’s something wrong with the wiper switch itself. This can usually be checked by swapping out the switch with another one from a different vehicle (if you have access to one). If that doesn’t work, then the switch will need to be replaced.
Why are My Jeep Windshield Wipers Not Working?
If your Jeep’s windshield wipers are not working, there are a few potential causes. First, check to see if the wipers are turned on. If they are turned off, simply turn them on and see if that solves the problem.
If the wipers are turned on and still not working, the next thing to check is the fuse. The fuse for the windshield wipers is usually located in the engine bay near the battery. If this fuse is blown, it will need to be replaced before the wipers will work again.
Another potential cause of non-working windshield wipers is a faulty wiper motor. The wiper motor is what powers the windshield wipers and if it is not working properly, neither will the wipers. In most cases, a faulty wiper motor will need to be replaced by a professional mechanic.
Finally, if all else fails, it is possible that there is an issue with the actual windshield itself. If there is something obstructing the path of the windshield wipers (such as ice or debris), they will not be able to function properly. In this case, you’ll need to clean off whatever is blocking them before they’ll start working again.
What Would Cause Windshield Wipers to Stop Working?
There are a few potential reasons why your windshield wipers may have stopped working. The most common cause is a blown fuse. If this is the case, simply replace the fuse and they should start working again.
Another possibility is that the wiper motor itself has burned out. This would require replacing the entire motor assembly. If neither of these is the issue, then it’s possible that there is something wrong with the wiper linkage.
This could be due to corrosion or debris preventing proper movement. In some cases, simply cleaning and lubricating the linkage can fix the problem. However, if it’s severely damaged, it will need to be replaced.
Finally, it’s also possible that there is an electrical issue somewhere in the wiper system. This could be a loose wire or connection, or a problem with one of the sensors or switches. Trace through the system to see if you can identify any issues and repair them as necessary.
How Do I Reset My Wipers?
If your windshield wipers are leaving streaks or aren’t cleaning your windshield as well as they used to, it’s probably time to reset them. Resetting your wipers is a simple process that only takes a few minutes. To reset your windshield wipers, you’ll need to clean the blades first.
Use a damp cloth to wipe away any dirt, debris, or grime that’s build up on the blades. Once the blades are clean, extend them fully and then fold them back into their resting position. Next, locate the tab on the underside of the wiper arm closest to the blade.
This tab is what holds the wiper in place when it’s not in use. Gently pull on the tab until it releases from the blade holder. With the tab released, you can now slide the wiper blade off of its holder.
Take note of which way the blade was positioned on the holder so that you can put it back on correctly. Now it’s time to clean the wiper holder itself. Use a cotton swab or toothbrush to remove any dirt or grime that’s accumulated in there over time.
Once it’s clean, insert the wiper blade back into its holder making sure that it’s positioned correctly. Push down on the tab until it clicks back into place securing the blade in position. Repeat this process for your other windshield wiper and then test them out by running some water over your windshield!
How Can You Tell If a Wiper Relay is Bad?
If your wipers are working intermittently or not at all, it could be a sign that your wiper relay is bad. Other signs that your wiper relay may be failing include the wipers moving slowly or erratically, or making unusual noises. To test whether your wiper relay is bad, first check the fuse.
If the fuse is blown, replace it and see if that fixes the problem. If the fuse is good, then use a multimeter to test the continuity of the relay. If there is no continuity, then the relay is likely bad and needs to be replaced.
Jeep Wrangler Windshield Wiper Fix
Conclusion
If your 2017 Jeep Wrangler wipers are not working, there are a few things you can check to see what the problem might be. First, make sure that the windshield wiper fluid reservoir is full and that the wipers are turned on. If they are, then check to see if the blades are frozen or obstructed in any way.
Sometimes ice or debris can prevent the wipers from moving properly. If neither of these solutions solve the problem, then it may be an issue with the wiper motor itself and you will need to take it to a mechanic to have it checked out.