If you’re like most Jeep Wrangler owners, you probably don’t think much about your tie rod ends. But these small components play a big role in keeping your Wrangler safe and stable on the road. That’s why it’s important to inspect them regularly and replace them when they show signs of wear.
Tie rod ends are located at the end of each tie rod. There are two per wheel, one on each side of the vehicle. They connect the inner and outer tie rods, which help steer your Jeep.
The inner tie rod is attached to the steering rack, while the outer tie rod is connected to the wheel spindle. Tie rod ends act as pivots, allowing the inner and outer tie rods to move independently of each other. Over time, tie rod ends can become worn or damaged from use and weather exposure.
This can cause looseness in the steering system, making it harder to control your Jeep. In extreme cases, a broken tie rod end can cause your Jeep to lose control entirely.
If you own a 2016 Jeep Wrangler, you may have noticed that the tie rod ends seem to be failing prematurely. In fact, many owners have reported that their tie rod ends need to be replaced after only a few thousand miles. While this is certainly frustrating, it’s important to remember that Jeep is aware of the problem and is working on a fix.
In the meantime, there are a few things you can do to extend the life of your tie rod ends. First, make sure that you’re regularly inspecting your tie rod ends for wear and tear. If you see any damage, replace them immediately.
Additionally, don’t forget to lubricate your tie rod ends regularly – this will help prevent premature wear and tear. Finally, if you do end up needing to replace your tie rod ends, make sure to use high-quality parts – cheap knock-offs are more likely to fail prematurely. While it’s certainly annoying to have to deal with faulty tie rod ends, remember that Jeep is working on a fix and in the meantime, there are steps you can take to extend their life.
Jeep Wrangler Jk Tie Rod Ends
If you own a Jeep Wrangler JK, then you know that one of the most important parts of your suspension system are your tie rod ends. These small parts are responsible for connecting your steering system to your wheels, and they play a vital role in keeping your Jeep safe and stable on the road. Over time, however, tie rod ends can wear down and become damaged, which can lead to serious problems with your suspension.
That’s why it’s important to regularly check your tie rod ends for wear and tear, and to replace them if necessary. If you’re not sure how to check or replace your tie rod ends, don’t worry – it’s actually pretty easy! In this blog post, we’ll walk you through everything you need to know about Jeep Wrangler JK tie rod ends.
We’ll start by explaining what they are and how they work, then we’ll show you how to inspect them for damage. Finally, we’ll give you some tips on replacing them if necessary. So let’s get started!
What are the Symptoms of Worn Tie Rod Ends?
When your tie rod ends are worn, it can cause a number of problems with your vehicle. The most common symptom is that your car will pull to one side when you are driving. This is because the worn tie rod end is not able to keep the wheel aligned properly.
You may also notice that your steering feels loose or sloppy. This is because the worn tie rod end is not able to provide the proper resistance when you turn the steering wheel. Another symptom of worn tie rod ends is uneven tire wear.
This is because the misaligned wheels are causing the tires to scrub against the road surface. If you notice any of these symptoms, it’s important to have your tie rod ends checked by a qualified mechanic as soon as possible.
How Do You Know If Your Jeep Tie Rods are Bad?
The main symptom of a bad tie rod is unusual tire wear. If your vehicle starts to pull to one side or the other while driving, or if your steering feels loose or off, it’s likely that your tie rods are bad. You may also hear strange noises coming from the front end of your car when turning.
These can be signs that your inner or outer tie rod ends are worn out and need to be replaced. If you suspect that your tie rods might be going bad, the best way to confirm it is to have a professional mechanic take a look at them. They will be able to tell you for sure if they need to be replaced, and can do so quickly and easily.
In most cases, all four tie rod ends will need to be replaced at the same time in order to keep everything balanced and working properly.
How Many Tie Rods Does a Jeep Wrangler Have?
A Jeep Wrangler has four tie rods. The front two are connected to the steering knuckles, and the rear two are connected to the lower control arms. Each tie rod is responsible for keeping the wheel aligned with the body of the vehicle.
If one of the tie rods breaks, it can cause the wheel to become misaligned, which can lead to problems with steering and handling.
How Much Does It Cost to Replace Tie Rods on a Jeep?
Assuming you need both inner and outer tie rods, the average cost to replace tie rods on a Jeep is between $200 and $300. This does not include the cost of labor, which can range anywhere from $50 to $100 per hour.
Replacing Tie Rod Ends on a Jeep JK
Conclusion
The 2016 Jeep Wrangler is a great vehicle for those who enjoy off-roading. One important component to consider when outfitting your Jeep for off-roading is the tie rod end. The tie rod end helps to connect the steering wheel to the front wheels and allows for smooth turning.
When choosing a tie rod end for your Jeep, it is important to consider strength and durability. There are many aftermarket options available that are specifically designed for off-road use. Installing a new tie rod end is a relatively easy process and can be completed in about an hour.