The 2012 Jeep Wrangler throttle body is a crucial component of the engine, and it’s important to keep it clean and free of debris. A clogged throttle body can cause all sorts of performance issues, from decreased power to uneven idling. Fortunately, cleaning the throttle body is a relatively simple task that you can do at home with just a few tools.
If your Jeep Wrangler is having trouble starting, idling roughly, or just not running as smoothly as it should, the problem could be with the throttle body. The throttle body is responsible for regulating the airflow into the engine, and if it gets dirty or clogged, it can cause all sorts of performance issues. Fortunately, cleaning or replacing the throttle body is a relatively easy fix that you can do yourself.
Here’s a step-by-step guide to cleaning or replacing the throttle body on your Jeep Wrangler: 1. Disconnect the negative battery cable. 2. Remove the air intake ductwork from around the throttle body.
3. Unplug any electrical connectors from the throttle body. 4. Use a wrench to loosen and remove the bolts that hold the throttle body in place. Be careful not to drop any of the small parts inside!
5. Clean out any dirt or debris from inside thethrottle body with compressed air or a brush (a toothbrush works well). If there’s excessive buildup, you may need to soak it in carburetor cleaner overnight and then scrub it clean again tomorrow morning before proceeding. Reassemble everything in reverse order once everything is clean and free of obstruction.
.
2012 Jeep Wrangler Throttle Position Sensor Location
The 2012 Jeep Wrangler throttle position sensor is located in the engine compartment on the right side of the vehicle. It is mounted on the throttle body and is attached to the throttle linkage.
What Does a Throttle Body Spacer Do for a Jeep Wrangler?
A throttle body spacer is an aftermarket device that can be installed on a Jeep Wrangler to improve engine performance. The primary purpose of a throttle body spacer is to create more space between the intake manifold and the throttle body. This extra space allows for more air to flow into the engine, which can lead to increased horsepower and torque.
In addition, a throttle body spacer can also help improve fuel economy by allowing the engine to run more efficiently.
How Much Does It Cost to Replace the Throttle Body in a Jeep?
If your Jeep is starting to have issues with idling, or if the engine is hesitating when you step on the gas, it might be time to replace the throttle body. This isn’t a super difficult job, but it will require some time and effort. Here’s a rundown of what you can expect in terms of cost:
The throttle body itself will likely cost between $100 and $200. However, since this is a pretty involved repair, you can expect to pay around $500 for parts and labor. If you’re comfortable doing the work yourself, you can bring that cost down significantly.
Just be aware that it’s not a simple fix – there are quite a few steps involved. In short, replacing the throttle body in your Jeep will probably cost somewhere between $500 and $1000 depending on whether or not you do the work yourself. Not exactly cheap, but fortunately this isn’t something that needs to be done very often.
How Do I Reset My Jeep Throttle Body?
If you’re experiencing issues with your Jeep’s throttle body, resetting it may help resolve the problem. Here’s how to do it: 1. Disconnect the negative battery cable.
2. Remove the air intake duct and throttle body cover. 3. Clean the throttle body and idle control valve with a throttle body cleaner or carburetor cleaner. Be sure to follow the instructions on the cleaner’s label.
4. Install thethrottle body cover and air intake duct. 5. Reconnect the negative battery cable.
How Much Does It Cost to Fix the Electronic Throttle Control on a Jeep?
If your Jeep’s electronic throttle control is broken, it can be a costly repairs. The electronic throttle control is responsible for regulating the engine’s air intake, so it’s a vital part of the vehicle. Replacing the entire system can cost around $1,500.
However, if only certain parts of the system are damaged, the repairs may be less expensive. For example, replacing just the throttle body can cost between $200 and $500. If you’re not sure what’s wrong with your Jeep’s electronic throttle control, take it to a mechanic or dealership for diagnosis.
2012 Jeep Wrangler Throttle Body Control Light On. Back To Basics. Don't Over Think It!
Conclusion
The 2012 Jeep Wrangler Throttle Body is a great addition to your Jeep. It gives you more control over your throttle, and allows you to get more power out of your engine. It’s easy to install and comes with all the necessary hardware.
{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”:[{“@type”: “Question”, “name”: “What Does a Throttle Body Spacer Do for a Jeep Wrangler? “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” A throttle body spacer is an aftermarket device that can be installed on a Jeep Wrangler to improve engine performance. The primary purpose of a throttle body spacer is to create more space between the intake manifold and the throttle body. This extra space allows for more air to flow into the engine, which can lead to increased horsepower and torque. In addition, a throttle body spacer can also help improve fuel economy by allowing the engine to run more efficiently.” } } ,{“@type”: “Question”, “name”: “How Much Does It Cost to Replace the Throttle Body in a Jeep? “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” If your Jeep is starting to have issues with idling, or if the engine is hesitating when you step on the gas, it might be time to replace the throttle body. This isn’t a super difficult job, but it will require some time and effort. Here’s a rundown of what you can expect in terms of cost: The throttle body itself will likely cost between $100 and $200. However, since this is a pretty involved repair, you can expect to pay around $500 for parts and labor. If you’re comfortable doing the work yourself, you can bring that cost down significantly. Just be aware that it’s not a simple fix – there are quite a few steps involved. In short, replacing the throttle body in your Jeep will probably cost somewhere between $500 and $1000 depending on whether or not you do the work yourself. Not exactly cheap, but fortunately this isn’t something that needs to be done very often.” } } ,{“@type”: “Question”, “name”: “How Do I Reset My Jeep Throttle Body? “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” If you’re experiencing issues with your Jeep’s throttle body, resetting it may help resolve the problem. Here’s how to do it: 1. Disconnect the negative battery cable. 2. Remove the air intake duct and throttle body cover. 3. Clean the throttle body and idle control valve with a throttle body cleaner or carburetor cleaner. Be sure to follow the instructions on the cleaner’s label. 4. Install thethrottle body cover and air intake duct. 5. Reconnect the negative battery cable.” } } ,{“@type”: “Question”, “name”: “How Much Does It Cost to Fix the Electronic Throttle Control on a Jeep? “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” If your Jeep’s electronic throttle control is broken, it can be a costly repairs. The electronic throttle control is responsible for regulating the engine’s air intake, so it’s a vital part of the vehicle. Replacing the entire system can cost around $1,500. However, if only certain parts of the system are damaged, the repairs may be less expensive. For example, replacing just the throttle body can cost between $200 and $500. If you’re not sure what’s wrong with your Jeep’s electronic throttle control, take it to a mechanic or dealership for diagnosis.” } } ] }