When the ABS light comes on in a 2011 Jeep Wrangler, it’s usually because of a problem with the ABS control module. The module is responsible for controlling the ABS system, and if it isn’t working properly, the ABS system won’t work either. There are a few different things that can cause the ABS control module to fail, and most of them are relatively easy to fix.
If your Jeep Wrangler is having ABS problems, it might be time to replace the ABS control module. This is a relatively easy repair that you can do yourself, and it will save you a lot of money compared to taking it to a mechanic. Here’s how to do it:
1. Disconnect the negative battery cable. 2. Remove the center console. 3. Unplug the ABS control module connector.
4. Remove the two screws that hold the module in place. 5. Pull out the old module and install the new one in its place. Make sure to plug in the connector before screwing it in place.
2010 Wrangler Abs Module
If your Jeep Wrangler JK is equipped with ABS (Anti-lock Brake System), then it’s also equipped with an ABS module. This module is responsible for controlling the ABS system, and if it fails, your Wrangler will be without ABS. The most common sign that your Wrangler’s ABS module has failed is the ABS light coming on the dash.
If this happens, you’ll want to take your Wrangler to a qualified mechanic or dealership to have the issue diagnosed and repaired. There are a few different ways that an ABS module can fail. The most common is simply due to age and wear-and-tear; after years of use, the internal components of the module can break down and cause problems.
Other times, an external component like a sensor can fail and cause issues with the module. In any case, a failed ABS module is not something that you want to ignore. Not only will it mean that your Wrangler won’t have ABS (which could be dangerous in certain situations), but it could also lead to other problems down the road if left unaddressed.
What Happens When the Abs Control Module Fails?
When the ABS control module fails, the most common symptom is that the ABS warning light will come on. Other symptoms may include the ABS pump running continuously or sporadically, or brake pedal pulsation when braking. If the ABS control module fails completely, it will disable the ABS system and the vehicle will have normal brakes without anti-lock functionality.
How Much Does It Cost to Replace an Abs Module?
If your car has an anti-lock braking system (ABS), then you may be wondering how much it would cost to replace the ABS module. The answer can vary depending on a few factors, but typically, you can expect to pay around $1,000 for a new ABS module. One factor that can affect the cost of replacing an ABS module is the make and model of your car.
For example, if you have a luxury vehicle with an advanced ABS system, then the replacement module may be more expensive than for a less sophisticated system found in a more budget-friendly car. Another factor that can play into the price is whether you purchase the part from a dealership or aftermarket supplier. In general, parts from dealerships tend to be more expensive than those sourced from aftermarket suppliers.
Finally, labor costs can also vary depending on where you take your car to get the replacement module installed. If you have a mechanic that you trust and who offers competitive rates, then this could help keep costs down somewhat. Overall though, expect to pay around $1,000 or so for a new ABS module – possibly more if your car is on the higher end of things in terms of make and model.
What Causes Abs Control Module to Fail?
When it comes to your car’s ABS control module, there can be a few different things that can cause it to fail. The most common reason for an ABS control module to fail is because of a wiring issue. This could be due to a loose connection, a short circuit, or even just corrosion on the wires.
If the wiring is not the problem, then it is likely that the ABS control module itself has failed. This could be due to a manufacturing defect or simply because it has been worn down over time from use. Whatever the cause, if your ABS control module has failed, it will need to be replaced in order to get your car’s ABS system working again.
How Much Does It Cost to Fix Abs on Jeep?
If you need to replace your Jeep’s ABS (anti-lock brake system), it will cost you an average of $1,200. This price includes labor and parts, and can range from $950 to $1,500 depending on the make and model of your Jeep.
Replacing ABS Control Module in Jeep Wrangler JK Unlimited
Conclusion
If your 2011 Jeep Wrangler is having ABS issues, it might be time to replace the ABS control module. This blog post will walk you through the process of replacing the module, step by step. You’ll need a few tools and supplies, but otherwise it’s a pretty straightforward process.
Once you’ve replaced the module, your Jeep should have better braking performance.