1999 Jeep Wrangler Clutch Pedal Bushing

If you’re a Jeep Wrangler owner, then you know that one of the most important parts of your vehicle is the clutch pedal bushing. This little component is responsible for ensuring that your clutch pedal operates smoothly and correctly. Unfortunately, over time, these bushings can wear out and need to be replaced.

In this blog post, we’ll show you how to replace the clutch pedal bushing on a 1999 Jeep Wrangler.

If your Jeep Wrangler is like most, the clutch pedal bushing wears out over time and needs to be replaced. This is a relatively easy repair that can be done at home with a few tools. Here’s how to do it:

1. Jack up the front of your Jeep and remove the tire. 2. Locate the clutch pedal bushing on the firewall. It will be held in place by a metal clip.

3. Use a flathead screwdriver to pry the old bushing out of its housing. 4. Install the new bushing into the housing and replace the metal clip to hold it in place. 5. Lower your Jeep and test the clutch pedal to make sure it feels normal before you hit the road again!

Clutch Pedal Bushing Jeep Wrangler Tj

If you own a Jeep Wrangler TJ, then you know that one of the most important parts of your vehicle is the clutch pedal bushing. This bushing is responsible for keeping your clutch pedal in place and ensuring a smooth operation. Unfortunately, over time these bushings can wear out and need to be replaced.

Here at Johnson’s Auto Parts, we carry a wide selection of replacement clutch pedal bushings for Jeep Wrangler TJs. We have both OEM and aftermarket options available, so you can find the perfect fit for your vehicle. And if you’re not sure which bushing is right for your Jeep, our team of experts would be happy to assist you.

Replacing your worn-out clutch pedal bushing is a relatively easy task that can be completed in an afternoon. Simply remove the old bushing and install the new one in its place. But if you’re not comfortable doing it yourself, our team at Johnson’s Auto Parts would be happy to do it for you.

Contact us today to schedule an appointment.

What is a Clutch Pedal Bushing

If your clutch pedal feels spongy or sinks to the floor, you may need to replace your clutch pedal bushing. This small rubber bushing is located at the point where the pedal attaches to the firewall. Over time, it can deteriorate and cause problems.

Symptoms of a Bad or Failing Clutch Pedal Bushing #1 – Spongy clutch pedal feel One of the first symptoms of a problem with the clutch pedal bushing is a spongy feel when depressing the pedal.

The bushing is responsible for providing a snug fit between the pedal and firewall, so if it’s damaged, there may be more play than usual in the connection. This can make it feel like the pedal is sinking down further than normal when you press on it. #2 – Sinking clutch pedal

Another symptom of a bad or failing clutch pedal bushing is a sinking feeling in the pedal itself. If there’s excessive play in the connection between the firewall and pedal, then gravity will eventually take over and pull the heavier pedal down further than normal. Once again, this can give you the sensation that something isn’t right when depressing the clutch.

#3 – Difficulty shifting gears If you have a problem with your clutchpedalbushing,it may become difficultto shift gears while driving, becausetheclutchmay not disengage fullywhendepressingthepedalallthewaydown.Thissymptomisusuallyaccompaniedbyoneoftheprevioussymptomsandcanmakedrivingdangerousifnotaddressedinatimelymanner Replacing Your Clutch Pedal Bushing

Fortunately, replacing your clutch pedal busing is relatively easy and inexpensive to do yourself. You’ll just need some basic hand tools and an afternoon of free time to get it done!

Where is the Clutch Pedal Bushing Located

If you’re like most people, you probably don’t think about your car’s clutch pedal bushing very often. But if you’ve ever wondered “Where is the clutch pedal bushing located?”, we’re here to help. The clutch pedal bushing is located on the back of the clutch pedal, where it attaches to the firewall.

It’s a small, round piece that helps to cushion and lubricate the connection between the pedal and firewall. Over time, these bushings can wear out and need to be replaced. Replacing a worn out clutch pedal bushing is a pretty simple job that most people can do themselves in about an hour or so.

All you’ll need is a new bushing (available at any auto parts store), a few basic tools, and some patience. Here’s a quick rundown of how to replace your clutch pedal bushing: 1) Remove the old bushing: First things first, you’ll need to remove the old bushing from the back of the pedal.

This is usually just a matter of popping it out with a screwdriver or other similar tool. If it’s really stuck in there, you may need to use a hammer to gently tap it loose. Just be careful not to damage the metal surface aroundthe hole as you do this.

2) Clean up the area: Once the old bushing is out, take a moment to clean up any dirt or grime that has accumulated aroundthe hole in the firewall.

What are the Symptoms of a Bad Clutch Pedal Bushing

A bad clutch pedal bushing can cause a number of problems. The most common symptom is a squeaking noise when the pedal is depressed. This is caused by the metal sleeve of the bushing rubbing against the plastic or metal housing.

The noise may be intermittent at first, but will eventually become constant. Other symptoms include a stiff or spongy feeling when depressing the pedal, and premature wear on the clutch pedal itself. In some cases, the bushing can break completely, causing the pedal to collapse to the floorboard.

If this happens, it will be necessary to replace the entire bushing assembly.

How Do You Replace a Clutch Pedal Bushing

If you’re having trouble with your clutch pedal, it might be time to replace the bushing. This is a relatively easy repair that anyone with some basic mechanical skills can do. Here’s a step-by-step guide to replacing a clutch pedal bushing.

1. Jack up the car and remove the wheel. You’ll need to get under the car, so it’s best to put it on jack stands. 2. Disconnect the battery.

This will prevent any electrical shorts while you’re working on the car. 3. Remove the plastic cover over the firewall (the large panel behind the engine). There are usually several screws holding it in place.

Once you’ve removed the cover, you should be able to see the back of the pedal assembly. 4. Locate the old bushing and pry it out with a flathead screwdriver or similar tool. Be careful not to damage the metal surface around the bushing hole.

5 .Install the new bushing by pressing it into place with your fingers or a small tool such as a drift punch (a blunt-ended tool used for striking). Make sure that the new bushing is fully seated before moving on to step 6 .

If necessary, use a hammer to lightly tap around perimeter of new bushing until it’s flush with surrounding metal surface.. New bushings are often slightly larger than old ones, so don’t be alarmed if there’s a small gap around edge of new one after installation.

. It won’t affect function or performance of replacement part.. 6 .Replace plastic cover over firewall and reconnect battery.. Test pedal operation before lowering car off jack stands..

Jeep TJ clutch pedal bushing replacement/repair

Conclusion

If your Jeep Wrangler is from 1999 or earlier, then you may need to replace the clutch pedal bushing. This bushing helps to keep the pedal in place and can become worn out over time. Replacing the bushing is a relatively simple process and can be done at home with a few tools.