If you’re like most Jeep Wrangler owners, your Jeep is more than just a vehicle. It’s a way of life. And that means you take pride in every aspect of your Jeep, from the engine to the interior.
So when it comes time to replace your Jeep’s door panels, you want to make sure you choose panels that fit your style and personality. That’s why we’ve put together this guide on choosing the best door panels for your 1990 Jeep Wrangler.
If you’re looking for a great way to update the look of your 1990 Jeep Wrangler, consider replacing the door panels. This is a relatively easy project that can make a big difference in the overall appearance of your vehicle. There are a few things to keep in mind when choosing new door panels, such as material and color.
You’ll also want to make sure that the panels you choose fit well and are easy to install. With a little bit of research, you should be able to find the perfect door panels for your Jeep Wrangler.
How to remove Jeep Wrangler YJ door panels
Jeep Yj Full Door Panels
If you’re in the market for new or replacement Jeep Yj Full Door Panels, there are a few things you’ll want to keep in mind. Here’s a quick guide to help you make the best decision for your needs. Material: The first thing you’ll want to consider is what material you need your door panels to be made out of.
There are three main options: aluminum, steel, and fiberglass. Each has its own set of pros and cons that you’ll need to weigh before making a decision. Aluminum is the lightest option, so it’s ideal if weight is a major consideration for you.
However, it’s also the most expensive material choice. Steel is more affordable and still provides good durability, but it’s heavier than aluminum. Fiberglass is the least expensive option and offers good durability, but it can be more difficult to work with than the other two materials.
Installation: Another thing to keep in mind is how easy or difficult installation will be. If you’re not comfortable working with tools or aren’t confident in your ability to follow instructions, then opting for an easier-to-install panel might be the best route for you. On the other hand, if you don’t mind getting your hands dirty and are confident in your DIY skills, then choosing a more complex panel might save you some money in the long run.
Just be sure that whichever route you choose, you have all the necessary tools and supplies on hand before starting installation. Price: Of course, price is always going to be a factor when making any purchase. Jeep Yj Full Door Panels vary widely in price depending on factors like material choice and complexity of design.
It’s important to set a budget before beginning your search so that you don’t get caught up in features that are outside of what you can afford. Once you’ve done that, start comparing prices between different retailers until you find the best deal possible.
How Do I Replace the Door Panels on My 1990 Jeep Wrangler
Assuming you would like a step-by-step guide on how to replace the door panels on a 1990 Jeep Wrangler: Tools You Will Need: -Phillips head screwdriver
-Flathead screwdriver -Pry bar or trim panel removal tool -10mm socket and ratchet (or wrench)
-T50 Torx bit (optional) Step One: Remove The Old Door Panels Start by opening the door all the way.
Then, using your Phillips head screwdriver, remove the two screws located at the bottom of the armrest. Next, locate the three screws holding the upper portion of the door panel in place near the speaker grille–remove these as well. Now that all of the screws are removed, begin prying up on the door panel with either a pry bar or trim panel removal tool being careful not to damage any of the clips.
Once you have pried up enough to get your fingers under it, pull back on the door panel until it pops off. You may need to wiggle it around a bit before it comes completely off as there are still some clips attached. Also be careful not to lose any of small parts like washers or nuts that may have come loose with the screws.
Set your old door panel aside.
Conclusion
The 1990 Jeep Wrangler door panels are a great way to add some style to your Jeep. They come in a variety of colors and styles, so you can find the perfect match for your Jeep. They are easy to install and come with all the necessary hardware.
{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”:[{“@type”: “Question”, “name”: “How Do I Replace the Door Panels on My 1990 Jeep Wrangler “, “acceptedAnswer”: { “@type”: “Answer”, “text”: ” Assuming you would like a step-by-step guide on how to replace the door panels on a 1990 Jeep Wrangler: Tools You Will Need: -Phillips head screwdriver -Flathead screwdriver -Pry bar or trim panel removal tool -10mm socket and ratchet (or wrench) -T50 Torx bit (optional) Step One: Remove The Old Door Panels Start by opening the door all the way. Then, using your Phillips head screwdriver, remove the two screws located at the bottom of the armrest. Next, locate the three screws holding the upper portion of the door panel in place near the speaker grille–remove these as well. Now that all of the screws are removed, begin prying up on the door panel with either a pry bar or trim panel removal tool being careful not to damage any of the clips. Once you have pried up enough to get your fingers under it, pull back on the door panel until it pops off. You may need to wiggle it around a bit before it comes completely off as there are still some clips attached. Also be careful not to lose any of small parts like washers or nuts that may have come loose with the screws. Set your old door panel aside.” } } ] }